Tile wastage
A wastage allowance of around 10% is a common starting point for straight lay patterns, and higher for diagonal, herringbone or complex cuts.
Enter the area and get a quick planning estimate for tiles, adhesive and grout — free, no sign-up. For the exact numbers on a real job, TileIQ works this out automatically from your measurements every time.
Planning estimates only. Adhesive and grout coverage vary by product, trowel notch size and tile size — always check the coverage guidance on the packaging you're using before ordering for a real job.
As a planning estimate: at a typical coverage rate of around 4kg per m² (roughly what a 6mm notched trowel uses for a single fix), 35m² needs about 140kg of adhesive — seven 20kg bags. Grout at a medium joint width (around 0.6kg per m²) would need about 21kg, or five 5kg bags. Always confirm against your specific product's coverage chart, since it changes with trowel notch size, tile size and how flat the substrate is.
A wastage allowance of around 10% is a common starting point for straight lay patterns, and higher for diagonal, herringbone or complex cuts.
Coverage depends on trowel notch size and whether it's a single or solid bed fix — check the bag for the exact figure.
Wider joints and larger tiles both increase how much grout a job needs per m².
This calculator gives a quick planning estimate. On a real job, TileIQ calculates tiles, adhesive and grout directly from the room measurements you take — with wastage, tile type and coverage built in — so the quote you send is accurate, not rounded up "to be safe".
Material calculations feed straight into a professional quote you can send from site.
See the quote app →Connect a compatible Leica Disto by Bluetooth for fast, accurate measurements.
See how it works →Free to start. No credit card required.